Stage Hire and more.
 
 
Scaffold Towers from Aliscaff
 
 
Home About Alistage and Aliscaff Stage Hire, Dance Poles and more Scaffold Towers and more Training & Services
Stage Hire In Action
 

Can you please pass on a big `thank you’ on to all of the guys who worked on the A Taste of Spain show on Sunday. Everything went very smoothly and everybody was helpful and in good humour – which is defiantly a plus for stressful one day shows like this!

Dean Parker
Wild Ones
A Taste of Spain – London, Regent St

 
  
 
 

Stage Systems > Stage Construction

 
     
 
Stage Steps
Stairs are constructed from individual treads rather than flights of steps at a pre-set height, giving total flexibility in design. Tread heights are in increments of 200mm to match our standard stage deck heights. Treads are available for both straight and spiral stairs, which can be combined to produce elaborate configurations. Handrails are available which fit in the same manner as stage guardrails.
     
     
  Stage Legs & Frames  
 
Standard legs are manufactured in increments of 200mm from 2" 16 swg tube, with a ring fabricated in position to transfer deck loading and give positive location. Stage legs from 600mm to 1200mm are fitted with struts which locate onto pins mounted on the stage deck, giving a high degree of lateral stability. For stages above 1200mm end frames are used with cross bracing giving a quick, simple and rigid solution, without the need to resort to the ad hoc use of scaffold tubes and steel couplers. Adjustable legs are available to cater for uneven ground.
 
     
     
  Stage Couplers  
 
Stage decks of the same height are joined together by means of Adjacent Unit Couplers, which are quick and simple to use and can join decks together in either one or two directions. Decks at dissimilar heights can be joined together by using our Drum Riser Couplers.
 
     
     
  Stage Guardrails  
 
The bottom of each guardrail post is swaged allowing it to pass through the holes in the plywood stage decking and locate into the top of the stage leg. Horizontal guardrail tubes have swaged ends which simply plug into the guardrail posts providing horizontal rails at heights of 500mm and 1000mm. Where guardrails are not being used a bung is fitted in the top of the stage leg to infil the hole in the stage deck.
 
     
     
  Fascia & Valance  
 
Phenol coated plywood fascia simply locates into a wedge shaped groove in the underside of the stile on the stage decking, providing an infil between the underside of the stage deck and the ground. Valance is also available which attaches with velcro to the stage stile. fitting level with the top of the stage deck.
 
     
     
 
© 2011 Aliscaff Ltd, Kenrich House, Elizabeth Way, Harlow, Essex, CM19 5TL, United Kingdom.
 
 
Telephone: 01279 406270  |  Fax: 01279 406292